Since 2010 making
Guitars for CNC

JEM PIA 2020

 

Guitar based on a JEM 7V adapted to PIA using images from reference.
This guitar is not a copy from an original but is visually closer and it dimensions is from JEM 7V plan.

SPECS
24 frets (21-24 scalloped optional)
Nut: 43 mm (1.69")
Fretboard radius: 430 mm (16,93")
Scale: 648 mm (25.51" in)
Inlays: PIA Blossom

This guitar was based on a 2D plan.

3DCNCGUITARS buy good plans on the internet to convert them into 3d guitars to be machined on CNC, but these plans are closer to the guitars but not an exact copy from the original models.

Also because old guitars are hard to find one that matches with another, except after 90´ models.
The guitar files have their dimensions and aspects are very close to the originals but do not think that you will buy this file and take from the CNC an exact model as the original one.

The files already contain simplified toolpaths. So you can use them as a starting point for your own toolpaths.

============================
Copyright
============================
3DCNCGUITARS / NBSDESIGN are the authors of this file.


 ===================================================================================================
THIS MODEL WILL OPEN ONLY ON VCARVE OR ASPIRE 11.5
Request a 10.5 version
===================================================================================================


 

Images from Moi3D

 


Surfaces

 


Images from Vectric

 


No Scalloped version optional

 


Neck and fretboard optional

 


Vectors

 




 



Go to the Store