This model was based on a Les paul 60' with the Golden Top Archtop
SPECS
Nut: (1,679") 42.67mm
12º fret: (2.070") 52.6mm
Heel: (2.244") 57mm
Scale: (25.5") 648mm
Body: (1,685") 42.8mm
Archtop: (0.62") 15.73mm
Archtop + Binding: (0,693") 17.61mm
Headstock angled: 17º
1º fret thickness: (0.6417") 16.3mm
12º fret thickness: (0.720") 18.3mm
Fretboard thickness: (0.224") 5.7 mm
Fretboard radius: 12"
//////////////////////////////////////////////////////////////////////
=====VCARVE or A S P I R E 11=====
This guitar will not open on previous versions
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
This guitar was based on a 2D plan.
3DCNCGUITARS buy good plans on the internet to convert them into 3d guitars to be machined on CNC, but these plans are closer to the guitars but not an exact copy from the original models.
Also because old guitars are hard to find one that matches with another, except after 90´ models.
The guitar files have their dimensions and aspects are very close to the originals but do not think that you will buy this file and take from the CNC an exact model as the original one.
The files already contain simplified toolpaths. So you can use them as a starting point for your own toolpaths.
============================
Copyright
============================
3DCNCGUITARS / NBSDESIGN are the authors of this file.
Surfaces
Vectors
Toolpaths
Images from Vectric