Telecaster 62

SPECS
Scale: 647.7mm (25.5)
Nut: 42.78mm (1.684)
12 fret: 51.59 (2.031)
21 fret: 51.74 (2.037)
Fretboard radius: 304.8 (12)

===================================================
THE FILES WILL OPEN ONLY ON VCARVE and ASPIRE 11.5
===================================================
This guitar was based on a 2D plan.
3DCNCGUITARS buy good plans on the internet to convert them into 3d guitars to be machined on CNC, but these plans are closer to the guitars but not an exact copy from the original models.
Also because old guitars are hard to find one that matches with another, except after 90´ models.
The guitar files have their dimensions and aspects are very close to the originals but do not think that you will buy this file and take from the CNC an exact model as the original one.
The files already contain simplified toolpaths. So you can use them as a starting point for your own toolpaths.

============================
Copyright
============================
3DCNCGUITARS / NBSDESIGN are the authors of this file.

Simulations